Cyrix MII 300 + TX Pro 2 mobo

[qaz]

hi,

MII 300 = 66 X 3.5 , 2.9V (233mhz)
TX Pro 2 MBoard

But it automatic jump to (292 mhz), all the jumper at TX Pro 2 is sure correct
( 66mhz X 3.5) ?

Why, how can i solve it?

[Susan]

You may be needing an updated BIOS for the MB if it is not identifying the chip correctly.

Here are a few at the Cyrix site that are specifically noted.

[urlwwwd.national.com/cyrix/motherbd.nsf/m_ii?openview&count=300[/url]