//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : BLUE SCREEN on overclocked 300

joe jarz
08-10-1999, 06:59 PM
I have a 300 celery @450 with a BH6, it works good most of the time. Sometimes when booting i get a blue screen, this time it says fatal exception OD has occurred at 0028:00000055 the current app will be terminated. the # shown isnt always the same, can anyone tell me whats causing this, how to fix it and what does OD and the #`s mean. thanks for the help if you can or will.JARZ
Underclocked
08-10-1999, 08:05 PM
Can't answer all those questions but it sounds as if you might be using 66MHz memory on a 100MHz bus??? If so, there's your problem.
joe jarz
08-11-1999, 07:20 AM
I am using 2 sticks of pc100 corsair memory 128 total
Underclocked
08-11-1999, 11:41 AM
Well, there you are. Just call me a dummy and try the next guy. http://www.sysopt.com/forum/wink.gif
Has that memory been tested in another machine? Remote, but possible.
AuraEdge
08-11-1999, 02:13 PM
Nah...it wouldnt even boot up part of the time if that were the case. Id say its a tad unstable right now...if u can, try bumping the voltage up by 0.1v. Oh and make sure u have AGP bus on 2/3 before ya smoke any silicone http://www.sysopt.com/forum/smile.gif
joe jarz
08-11-1999, 06:26 PM
let me change some of the original message i posted, the machine works excellent all the time. Sometimes when booting i get a blue screen, if i reboot it will almost always go through, sometimes twice. Underclock i wouldnt call you a dummy, just the opposite your trying to help me. Auraedge i will check settings and get back. thanks both of you for your help.