NT4 RAS question

[Zyplex]

Anyone knows if its possible to change the amount of rings before answer in RAS under NT4?

It answers at the first ring by default. I looked it up in some NT FAQ's and books but no luck. Its probably a regestry entry but I have no idea so far.

Thanks!

[Bleeding Edge]

You got to get to Jsiinc's RegHack http://www.jsiinc.com/reghack.htm . There's page loads of tips there. For an example:

Tip #114 » How do I set RAS to answer after more than 1 ring?

The only way I have found to get RAS to answer on "x" rings is to edit the registry at:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Class
and to locate the modems entry (Usually the 4th entry). Double click to expand it. Locate the modem in question where 0000 is the 1st modem. Double click and highlight the Monitor key. Double click the 1st entry which should be ATS0= and change the number of rings.
You will need to stop and restart the RAS service, but a reboot may be necessary.

Tip #0394 » Another way to set the number of rings on a RAS Server.

In tip 114 we used one method to set the number of rings before a RAS Server answers, here is another:

Edit HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\RasMan\Parameters\
and Add Value name of NoOfRings as a type REG_DWORD and set the data value to the number of rings desired.


Good-hunting, Zyplex.

[Zyplex]

Cool!

Great work!