replacing svga motherboard connector

[eshort]

this is really a partII to my post below but wanted to separate the ?s....

where can i find an SVGA female connector for the rear of an atx motherboard--and--where can i find a soldering "pot" to enable unsoldering of all the pins (10) at the same time? (*using a pencil type of soldering iron)?

tx

[dragflameson]

Originally posted by eshort
where can i find an SVGA female connector for the rear of an atx motherboard I think this (http://www.connecttech.net/product_info.php/products_id/455?osCsid=f6321a47056396e3721d146e74a28044) is what you're looking for, no?

[eshort]

looks good! need tyhe female version---also need a soldering tool to desolder-solder the old/new connector(s) to the motherboard.

[dragflameson]

Originally posted by eshort
also need a soldering tool to desolder-solder the old/new connector(s) to the motherboard. Radio Shack.

[eshort]

looked there--didnt have the needed tip..


need a tip measuring approx 1.5"X.50" that can be fitted onto a standard low wattage soldering iron (Weller or Unger brands).

[dragflameson]

OHh i c. I'm not sure. If you google it I'm sure you could find something. SEARS should have something.

[crossedup]

PM me with your addy and ill send you this dead board I have that is the same as yours, you can scavenge whatever you need from it.