ASUS P2B-f

[wilims]

Folks,
I'm in the process of building a computer based on the ASUS P2B-f motherboard. Spent the last 2 evenings trying to get it to boot with no luck--fans, power supply, drives all whirr up but I get nothing on screen. I've stripped the machine down to just the motherboard, a whitebread PCI video card and a floppy / reseated all the components (Celeron 400 CPU, PC100 sdram memory) / set and reset the jumpers as per the manual. Still no luck.
Any suggestions would be greatly appreciated.
Mark Simpson
mark@campingworld.com

[philipg]

try checking the bios to see if there is a setting for the PCI video card. its probably booting fine but no video card recogition.

[This message has been edited by philipg (edited 06-16-99).]

[redcow]

I have the same MOBO. After building my PC and powering it up...no video.
Had to reseat the card a couple of times and voila we have raster.

Good luck

pj