How do I change the agp/fsb ratio ?

[David Roberts]

How do I change the agp/fsb ratio to 2/3, is this in the bios or cmos settings? Or a jumper on m/b or v/card?

Thanks in anticipation

Dave

[kwai]

its in the bios setting -- how you change that depends on your motherboard. if you have a software accessed bios (eg bh6) then it will be in the software setup. if you change everything on your board, with jumpers... check your manual.

but if you're running at a 100 fsb, you don't really want to change that to a 1/1 ratio -- that's way over spec.

if you're running at 66 fsb, then yes, you do want to change it to 1/1