tmpeg write error

[sada12]

the tmpeg prog gives me this error at the end of encond:
Write error occurred at address 00182c11 of module 'TMPGEnc.exe' with 002A313C

i have 2 pc
in the old i never had this prob.
the same program vercion runs in both pcs. the same mpeg file for both. but in the new i take the error above.
i try win xp and w2k but the same.

the hardware of the pc with the error:
motherboard gigabyte 8I875 ultra
memory 2x256MB cas2,5 Kingston
vga gigabyte ati 9200

any help ???

[A1 Web]

Helo Sada

9 out of 10 times errors in TMPGEnc are causes by missing or corrupted FFDshow codec

update it HERE (http://prdownloads.sourceforge.net/ffdshow/ffdshow-20030523.exe) , reboot your machine, and try it again.

If you still have troubles, post back, but that may fix it.

I have 4 machines, (2 at home, and 2 at work) and I use TMPGEnc on any combination of them, and have run into similar problems to the one you describe, so I pretty sure that may help you out. ;)

[sada12]

Hello A1. :)
I try the update ( the default )but no luck :(
after reboot, the system return to a previous good working position, with out any error message appear.
the problem remains.
thanks any way for the help ;)

[A1 Web]

Well then my next suggestion is to do a FULL uninstall of TMPGEnc and try reinstalling. It sometimes happens for reasons unknown that you just had an install go bad (it happens)

Go to Add/Remove Programs and remove it ... then go to your Program Files folder, and remove any leftover folder/files.

** IF you are confident enough (BUT ONLY IF) you can do a registry search for "tmpgenc" and "pegasys" and delete the registry values (ALWAYS MAKE A RESTORE POINT BEFORE AMMENDING THE REGISTRY, JUST IN CASE SOMETHING GOES WRONG) **

If possible, go to Pegasys' website and download a fresh copy to rule out your previous download being faulty. (If you used this same copy to install on another computer, and it works fine, you can omit this step).

If still no go .. you may have to check that you have the proper codecs installed for the files you are trying to create/read

If you are familiar with codecs, only install the pnes you need on your system, if you are not familiar, then the K-Lite Codec pack is a fairly decent bundle ... you're best to remove any other previously installed codec packs (Tsusami etc) if you have any, before you install K-Lite. Too many same type codecs will only serve to confuse your PC.

[A1 Web]

One last note on this subject ... you may want to rule out that the video source you are converting is not the problem.

If you have TMPGEnc running on another machine, try the same video file and see if it works.

Last night I had my TMPGEnc Plus act up on me and crash when I got maybe 14% into the file ....

I refreshed FDDShow and my MPEG/XVID/DIV4 codecs and it still crashed ....

I tried it on another machine, and same thing ... then I tried a file that I know has good integrity, and it processed it no problems at all.

Just because a video file PLAYS, does not mean it's integrity is good. If it was Encoded with a cracked codec, it can have very undesirable impact on the resulting file, and any further encoding/re-encoding will give you problems.

If you suspect that the video file itself might be suspect, all is not lost. Download X VIDEO CONVERTER (http://www.xvideoconverter.com/) and try to re-encode the video to MPG and then see if TMPGEnc will read it without errors.

Isn't video conversion/editing fun ????? hehehehe
Welcome to my daily world. :(

[sada12]

A1 thanks ones again for your replay :t
the problem solved.
i download again the program and installed, and from that time the program run ok with out any error messages:) :) :)

[A1 Web]

Glad to hear you're back up and running Sada !! :cool: