bad color

[cjp]

I just bought a system with a Super 7 mainboard (pcchips m598) with amd k6-11-3d 330, with a SiS 530 intergrated video card. The problem is with display colors-yellow is yellow, but green is yellow. Blue is blue, but magenta is also blue, other colors also look incorrect. I've tried different resolution on the monitor (nec ms3fgx) with no effect. I use this computer with autocad and layer are displayed with different color. Is this a bad video card or bad drivers? other other problem.

[Bleeding Edge]

If available, get updated drivers and Bios from your system board manufacturer. Check your monitor cable first. If your using a 5 BNC connector type cable, double check the color codes. One of the colors may be reversed. If this cable is new (or old), whether or not it's a VGA/5-BNC cable, you may have a bad cable. If this happens only with AutoCad, and your running an older release of Acad, you may need to choose a different display driver from within AutoCad.
If it isn't any of these, you probably need to replace you MB because of the on-board (integrated) video chip.