bonz_dragon
03-14-2004, 08:40 PM
OK I've finally downloaded some pics of the "grill" I'm using on my blowhole. Now what's the easiest way to post them? Do they need to be downloaded to a website 1st?
Click to See Complete Forum and Search --> : Grill Pic's
bonz_dragon
03-14-2004, 10:18 PM
See if this works!
bonz_dragon
03-14-2004, 10:20 PM
One more!
Direct1
03-14-2004, 10:22 PM
How many are you talking about? You can attach pictures to you posts. Right above where you click "Submit Reply" is where you can attach files.
Good luck! :D
Good luck! :D
bonz_dragon
03-14-2004, 10:27 PM
Thanks,
Next stupid question. How to add more than 1 link per posting.
I'll get this yet!
Next stupid question. How to add more than 1 link per posting.
I'll get this yet!
Direct1
03-14-2004, 10:36 PM
I don't believe you can. You can link pics from a web site. If your Internet provider gives you free space, you can upload them there and link to them in a message.
Good luck! :D
Good luck! :D
crossedup
03-14-2004, 11:28 PM
Is that an old speaker grill?
Looks nice, whats under it? A 120mm
Looks nice, whats under it? A 120mm
bonz_dragon
03-15-2004, 12:36 AM
Yes that's a door speaker grill from a Nissan Sentra.
6" hole under it with only an 80mm fan. There's not enough room for a 120 between the PSU and the harddrive rack. Might be able to squeeze a 92mm in though.
Believe it or not but it helped lower temps by 10'C.
6" hole under it with only an 80mm fan. There's not enough room for a 120 between the PSU and the harddrive rack. Might be able to squeeze a 92mm in though.
Believe it or not but it helped lower temps by 10'C.
crossedup
03-15-2004, 08:24 AM
Believe it or not but it helped lower temps by 10'C.
I believe it, i put blowholes in all my Athlon builds, 1000 mhz and up. Best way to help control temps, IMO.
Been doing them by hand with a Dremel but i broke down last week and bought a 79mm hole cutter. Boy, is that a whole lot quicker. Not near as rough on the Dremel cutting discs either. I was going through about 10 per hole.
I believe it, i put blowholes in all my Athlon builds, 1000 mhz and up. Best way to help control temps, IMO.
Been doing them by hand with a Dremel but i broke down last week and bought a 79mm hole cutter. Boy, is that a whole lot quicker. Not near as rough on the Dremel cutting discs either. I was going through about 10 per hole.
leprechaun_40
03-15-2004, 10:59 PM
Does the cloth in that cover act as a filter?? :t
Neat Idea:D
Neat Idea:D
bonz_dragon
03-15-2004, 11:00 PM
From what I've seen that hole saw wasn't cheap either!
With a hole as large as this I 1st drilled a hole then cut with a very fine metal jigsaw blade. Came out very nice, just lightly around with a file to smooth of edges.
BTW, the grills were free! This also really helped the harddrive temps in that rack.
With a hole as large as this I 1st drilled a hole then cut with a very fine metal jigsaw blade. Came out very nice, just lightly around with a file to smooth of edges.
BTW, the grills were free! This also really helped the harddrive temps in that rack.
bonz_dragon
03-15-2004, 11:03 PM
Originally posted by leprechaun_40
Does the cloth in that cover act as a filter?? :t
Neat Idea:D
No cloth just the plastic grill with the fan blowing out.
Does the cloth in that cover act as a filter?? :t
Neat Idea:D
No cloth just the plastic grill with the fan blowing out.
SysOpt.com
Copyright Internet.com Inc. All Rights Reserved.
Copyright Internet.com Inc. All Rights Reserved.