Need help

[daeeki]

I'm planning to buy a new ram and I need some advice

my spec is this:
p III 600
Asus V7700 32mb
Samsung 128 ram
Intel 440BX AGPset mobo

to buy a ram, do I have to look for specific type of ram for my mobo? And is it easy to install ram by myself?
another question is I downloaded the program
call "BIOTWEAK", because I've tried to change my AGP aparteure size from 64 to 128 since I bought my graphic card. Can this program change aparteure size? I can see number 64 on these category:

Main menu: Intel 440Bx CPU-to-PCI bridge
Sub menu: AGP multi-transation timer
latency timer

Main menu: Intel 440Bx CPU-to-PCI/AGP Bridge
Sub menu: AGP latency timer

are these menu for changing AGP aparteure size?
plz help me out thx

[daveleau]

You can change your aperture size in the BIOS. I am not familiar with that program.

As fr RAM, you can use any SDRAM that is PC100 or PC133. It is recommended that you get PC133 though. When getting 256MB, be sure to get pretty good quality stuff. If you get high density, then it will not work on your 440BX mobo. 32x64 is what you need.

Good luck
Dave

[daeeki]

thanx dave
but what u mean by 32x64?
and what company ram should i go for? kingston? or same samsung?
and is there any other way to change aparteure size? because mine doesn't have one, I posted this problem alot of times but never solved

[Psycho Logical]

Look about half way down on this page (http://www.adriansrojakpot.com/Speed_Demonz/BIOS_Guide/BIOS_Guide_02c.htm) .

[socalgal]

As was related to you in your other closed thread, NO multiple posting. Post ONCE only in the most appropriate forum for the topic.

Read and comply with the PROPER POSTING TECHNIQUES (http://www.sysopt.com/forum/Forum1/HTML/013987.html) and / or THE FORM FAQ (http://www.sysopt.com/forum/faq/faq2.html) .