Power Supply connectors

[Imperion1]

Does anyone know any sites that I might be able to find the 20pin power supply connector?
I'm running 2 powersupplies in my system, the 300watt runs my computer and hs/fan.
The 250watt runs the case fans and the vid card fan.

Need the connector for my powerbutton, light, and resistor so that I don't have to plug each pin in individually. 6 pins.

[tonym]

They are made by Molex, and are in the "mini Fit, Jr." line.

The part number for the housing (receptacle) is 39-01-2205 and for the female pins is 39-00-0182 (the pin P/N is 5556). Remember you'll need 20 pins, but I'd order 30 because I auume you'll be crimping the wires by hand (the crimping tool is $200+)!!

You can order these parts from Digikey (www.digikey.com);

The housing is Digikey P/N WM3709-ND and costs $1.89 each. The pins are Digikey P/N WM2501-ND and cost $0.37 per 10.

Hope this helps...


Tony

[Imperion1]

Spent the last hour searching through their catalog. Close. What I was really needing was the male header 15-06-0205. Found it on the molex site, but digikey couldn't find it through their search engine.
Thanks though, now I know what the part numbers are. So it makes it a little easier.

[Bsdboy]

You can find a good picture and diagram here (http://www.thetechzone.com/reviews/powersupply/enermax450/page3.shtml)

Bsdboy