Novice with dead motherboard

[Walter A. Hanks]

I bought a computer at a show last year that has a PCCHIPS M810 Socket A motherboard. I installed a new video card today and the motherboard appears to have died. I tried uninstalling the video card, resetting the bios, etc. It won't even boot far enough to engage the hard drive.

So, any magical fixes out there?

I didn't think so. Where do you recommend I go to get a replacement board at a low cost?

[nothing]

Newegg (http://www.newegg.com)

[tricktx]

ok.
1. talk bord out os case+power supply
2. place on bed and connect up with just

Motherboard
cpu +Hs+Fan

thats it, 3.clear cmos jumper and reset to open

if no boot prob dead mobo get new one. if not we will take it from there if the fan spins.

[BipolarBill]

To clarify:

Remove the board from the case, place it on a soft, non-conductive surface near the case and plug in the ATX power. Place the vid card in and connect the monitor. Connect the power. Nothing else needs to be connected. Press down hard on the vid card and use your screwdriver to short the POWER BUTTON pins. See if it POSTs