Harold7
05-24-2001, 04:39 PM
Being bored, I was checking out files on my C:\ and came across this file Suhdlog.dat... I opened it in Notepad and except for a lot of gibberish it contains a lot of comments about my HD.
This is just a small porion of the data in this file: [HMR1: Read1]
Drv=:0x80:, Cnt=:1:, Op=:0:, SecCyl=:0x1:, Hd=:0x0:, ExtSec=:0:
[Begin]
м |؋ =t = ut뽵Z R 3 |MV^s3Nuϋ}=Uu | <
t<t P XPSQV
t ^Y[X
Invalid Partition Table
Disk Error Reading OS
No Operating System
No Active Partition ? ? A? = U
[End with Return=:0:]
[HMR1: Read2]
Drv=:0x80:, Cnt=:1:, Op=:0:, SecCyl=:0x1:, Hd=:0x1:, ExtSec=:63:
[Begin]
? ? XMSWIN4.1 ? ? ? )<7SYSTEM FAT32 3ɎѼ{x v VU"~ Nٽ |EFE8N@}% r:f|f;WuVs ~ uEFV I@uB ~_ s&OtF23ҹ ;wv;s+FVs'~* w~}t<t }}^fAVfj RPSjj`~uB3vvBv
̸V@ad^r
@uB^Iu'
Invalid system disk
Disk I/O error
Replace the disk, and then press any key
IO SYSMSDOS SYS~ WINBOOT SYS U
[End with Return=:0:]
[HMR1: Write2]
Drv=:0x80:, Cnt=:1:, Op=:1:, SecCyl=:0x1:, Hd=:0x1:, ExtSec=:63:
I have no problems at all with my HD or Windows on my system, so I was wondering... is this file created as a result of having my 2 HDs, DVD-ROM and CD-RW on the on-board Promise Controller and not on IDE 0 or IDE 1?
Is there a program I can use to read everything in this file? http://www.sysopt.com/forum/smile.gif
This is just a small porion of the data in this file: [HMR1: Read1]
Drv=:0x80:, Cnt=:1:, Op=:0:, SecCyl=:0x1:, Hd=:0x0:, ExtSec=:0:
[Begin]
м |؋ =t = ut뽵Z R 3 |MV^s3Nuϋ}=Uu | <
t<t P XPSQV
t ^Y[X
Invalid Partition Table
Disk Error Reading OS
No Operating System
No Active Partition ? ? A? = U
[End with Return=:0:]
[HMR1: Read2]
Drv=:0x80:, Cnt=:1:, Op=:0:, SecCyl=:0x1:, Hd=:0x1:, ExtSec=:63:
[Begin]
? ? XMSWIN4.1 ? ? ? )<7SYSTEM FAT32 3ɎѼ{x v VU"~ Nٽ |EFE8N@}% r:f|f;WuVs ~ uEFV I@uB ~_ s&OtF23ҹ ;wv;s+FVs'~* w~}t<t }}^fAVfj RPSjj`~uB3vvBv
̸V@ad^r
@uB^Iu'
Invalid system disk
Disk I/O error
Replace the disk, and then press any key
IO SYSMSDOS SYS~ WINBOOT SYS U
[End with Return=:0:]
[HMR1: Write2]
Drv=:0x80:, Cnt=:1:, Op=:1:, SecCyl=:0x1:, Hd=:0x1:, ExtSec=:63:
I have no problems at all with my HD or Windows on my system, so I was wondering... is this file created as a result of having my 2 HDs, DVD-ROM and CD-RW on the on-board Promise Controller and not on IDE 0 or IDE 1?
Is there a program I can use to read everything in this file? http://www.sysopt.com/forum/smile.gif