//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : RAID 0 Jumpers

RGraze
05-22-2001, 08:03 AM
What do I set the jumpers on my 2 hard drives that I'm going to use for RAID 0?
Kuasimodem
05-22-2001, 09:06 AM
If you're going to have them each on their own channel(IDE3,IDE4) with no other drives on the RAID controller, set them as singles and plug each one into the end connector on the cable.

This is the setup that I used for my RAID array on my Abit KT7-RAID motherboard.