PSU Help please?

[seeker205]

Can you guys help me? I just bought a Celeron 700 Mhz. And a ProComp mobo, and the guy said you can run Celerons and PIII's on 250 w. power supplies, well I used this heath monitoring program and it shows the volts are REALLY high and in the warning area, and I took a screen shot of it so you guys can see what i'm talking about ( http://seeker205.hypermart.net/snagit/psu.jpg ) anyway also when I play Unreal Tournament and only UT I can hear my motherboard alarms go off this worrys me. and I looked at the temp in the bios and my motherboard was 105 F. can you guys help me? thanks!

[This message has been edited by seeker205 (edited 04-12-2001).]

[This message has been edited by seeker205 (edited 04-12-2001).]

[Windy]

Everytime I've had the sirens go off, I've put in a bigger fan and the temperature of the CPU goes right down.
This has happened recently on a PC I built with an 800Mhz processor, the fan I put in was supposed to be adequate for up to a 1.2Ghz processor but the processor still overheated. I put in a decent fan and everything was OK.

[LJE2]

I used to use that program, the reason it's showing red, is it is above what is set in the preferences, you just need to go into the preferences or options, I don't remember and set your core voltage to 1.75 and the Aux to 2.50 and the alarms will stop. Your temps for CPU1 and 2 and Mobo are very low, in the screen shot. Even the 105 F your bios says is not to high.

[seeker205]

Thanks LJE2,
That worked! Thanks everyone for you help http://www.sysopt.com/forum/smile.gif