K6-2 overclocking...

[DemonKnight]

I'm running a k6-2 450 at 550 right now with the stock heatsink/fan and two extra case fans blowing on it. had a few problems at first but then I upped the voltage to 2.7 and all is well. I'm getting black and white as soon as I get a new videocard. (Cant wait..but must.. only 2 more days..) Oh yea my temp is 31-35c during normal windows usage, rises to about 40c during intense 3d games like half life.

[rlpos]

I am running a K6-2 333afr at 500mhz with a stock fan/heatsink and voltage set at 2.4v. The temp is 26C at idele and about 35c under load

[dday]

I'm not sure if this is going to help,but here's an address that will give a complete FIC503+rev1.1a manual with all your cpu settings,jumper settings and bios settings. http://home.zcu.cz/~simekm/va503.html
I've been running an AMD k6-3-450 at a comfortable 600mgz for several months now,and I'm using an Alpha heat sink and fan.
I was running a k6-2-350 at 400mgz using an oem fan and had some trouble depending on the heat and humidity.I do play alot of games on line,so that's the reason I overclock.

[DemonKnight]

I tried to OC to 600 but it wouldent get past the PCI bus scan. (it was a bunch of blinking white squares really)

[LemonHead]

okay, with a Copper orb how much extra *oomph* could i get from my K6-2 350??
could i reach 400, or maybe 415MHz?

Would this give me a significant speed increase in "black and white"?

Thanks
(btw its urgent, i'm hostin a LAN on tuesday and if i order now the parts -Copper orb and BLorb - will be delivered by then.)
Sean *******