Using psu fan's 2pin slot on A7V133 3pin connector

[Kozakowski]

Hi there,

I will be installing a standard 12v psu fan I have into my case. However, the fan only has a 12v wire and ground wire, no rotation wire is attached.

Would I damage the motherboard or the fan if I only place the 2pin slot on the ground and 12v connectors, leaving the rotation (blue) connector uncovered?

I will be placing this slot on the PWR_FAN connector on the Asus A7V133 motherboard.

The connector supports cooling fans of 4.2W or less.

Thanks,

[This message has been edited by Kozakowski (edited 04-02-2001).]

[Loveless]

no, I did that, and there is no problem

[Kozakowski]

Excellent, thanks a bunch!!