//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : help weird voltage on bros sys

germanjulian
09-20-2002, 12:57 PM
some might know that i build my brother a computer! and that i am moving out t/m (last post for a while till i get adsl)
anyway look at the picture and explain it to me!
surely the software isnt detecting it right?

athlon xp2100
512ddr
geforce 4200
1 HD
1 cd
350w Emerax Power supply
abit motherboard
winxp

no crashed or anything! no problems whatsoever!!!
germanNiklas
09-20-2002, 01:39 PM
hi
im brother of germanjulian
very famous in this forum
:)
PLEAS HELP ME WITH MY VOLTAGE
look at pic
then ull see whats so strange about it:confused:
dave-harper
09-20-2002, 03:05 PM
i wouldn't worry about the negative voltages
but you could try some other software
http://mbm.livewiredev.com/
kazuza
09-20-2002, 03:36 PM
Welcome to SysOpt, germanNiklas!
I wouldn't worry, that's just a software specific issue. However, in order to display them correctly, I would consider getting a piece of software for that perpous (like mbm,etc...).
Strawbs
09-20-2002, 04:02 PM
It's just getting the readings from the wrong place, check the voltages in the BIOS for more accuracy.

Welcome to SysOpt GermanNiklas. :t
germanNiklas
09-20-2002, 04:25 PM
ok thx guys
i dont know if i can post that much as u guys do
u have like 500 posts
im not a computer expert like u guys
ill just post questions :)
im good at that
but if u guys need any computer GAMES advice ;) ..........just ask me
im perfect at that
:D
Strawbs
09-20-2002, 04:32 PM
Originally posted by germanNiklas
ok thx guys
i dont know if i can post that much as u guys do
u have like 500 posts
im not a computer expert like u guys
ill just post questions :)
im good at that
but if u guys need any computer GAMES advice ;) ..........just ask me
im perfect at that
:D

get yourself over to the Gaming Forum! your post count will soon rise. ;)
Bigjakkstaffa
09-20-2002, 06:04 PM
Like strawbs says, the BIOS is the best place to check :)

--Jakk:t
dave-harper
09-20-2002, 08:34 PM
it may just be older ones but i don't think i've seen the negative voltages in the bios
Ammok
09-21-2002, 05:56 PM
If your voltage set up was that far amiss, I doubt your machine would be useable. More likely the software is misinterpretating the information from the sensor chip.

If your bios reading are fine, as suggested by the others, you shouldn't have to worry, just find a better monitor program.