AMD Thunderbird 1.4GHz not at full speed

[studgibson]

Alright, before I can ask you about overclocking, I need it to run at it's regular 1.4GHz speed. Everytime I set the CPU to run at 1.4GHz a blue screen comes up and tells me about a physical memory dump. It runs fine at 1.05GHz but if I wanted a computer of that speed, I woudn't have bought a 1.4 GHz. So what do ya figure's wrong and how can I fix it? Thanks in advance

studgibson

[Bigjakkstaffa]

Easy peasy - go into the BIOs and change the FSB from 100 to 133 - voila :)

--Jakk:t

[Bigjakkstaffa]

btw do it slowly but surely - go to 115 first then 133 for example.. and to access BIOS hit delete or F1 key at first displayed screen at boot up :)

--Jakk:t

[grimfandango]

Hello and welcome to sysopt!
:t


try settin it at133mhz fsb in the bios!


does your motherboard support 133mhz fsb?

what kinda motherboard is it!?

:t :)

[jmichna]

Since -- from your description it seems -- you are able to boot at 133mHz (1.4gHz) until a BSOD occurs, I'd look at your ram... is your memory rated to run at 133mHz or just 100mHz? Can you try less aggressive memory timings? Another possibility is a marginal heat sink/fan, or improperly installed HS/F... that 1.4TBird puts out a pretty good amount of heat... about 48watts at 1050mHz and 64watts at 1400mHz
jmichna

[grimfandango]

yup better check your mem too!!

:t

[NDD]

Need to know your mobo make/model.