hoodedrat
07-19-2002, 08:50 PM
wonderin what the proper direction of the fan on a hs should be... should it be blowing down on the hs or should it be blowing away from the hs.... thanks
| //flex table opened by JP
Click to See Complete Forum and Search --> : hs/f question hoodedrat 07-19-2002, 08:50 PM wonderin what the proper direction of the fan on a hs should be... should it be blowing down on the hs or should it be blowing away from the hs.... thanks tricktx 07-19-2002, 09:02 PM the fan should be blowing away from the heatsink therefor despersing the heat Richard hoodedrat 07-19-2002, 09:03 PM hrmm, got a thermaltake volcano 6cu and that blows out, and i havent touched it since i got it tricktx 07-19-2002, 09:05 PM then your ok grimfandango 07-19-2002, 09:57 PM The fan should blow air into the heat sink to cool it up!! :) Bigjakkstaffa 07-20-2002, 08:59 AM I think its very much a case of what works best, it can be one way or the other, just put ti whichever way gives the lowest temps, in may case blowing onto it :) --Jakk:t grimfandango 07-20-2002, 09:12 AM Originally posted by Bigjakkstaffa I think its very much a case of what works best, it can be one way or the other, just put ti whichever way gives the lowest temps, in may case blowing onto it :) --Jakk:t I dont think you can put it one way or the other!! :p Bigjakkstaffa 07-20-2002, 09:14 AM --i meant take off the fan and turn it the other way around -- not turn the HSF upside down :rolleyes: --Jakk:t grimfandango 07-20-2002, 10:26 AM I knew what you ment.. I was trying to say was if you put the fan the other way wont the blades of the fan hit/(come in contact) with the heat sink! :( :( dont need to get MAD. :( Bigjakkstaffa 07-20-2002, 11:18 AM LoL... would i ever get mad with you grimmy ? (:rolleyes: ) -i see what you mean about the fan blades and the fins, although i mainly use coolermaster HSF's so ive never had that problem, i just turn the fan around and go again... still if you can try it both ways on ur HSF, give it a try and use whichever way yields the lowest temps :) --Jakk:t grimfandango 07-20-2002, 02:29 PM Originally posted by Bigjakkstaffa LoL... would i ever get mad with you grimmy ? (:rolleyes: ) -i see what you mean about the fan blades and the fins, although i mainly use coolermaster HSF's so ive never had that problem, i just turn the fan around and go again... still if you can try it both ways on ur HSF, give it a try and use whichever way yields the lowest temps :) --Jakk:t heheh!! nice to hear that! well Bigjakkstaffa ! as Bizkitkid2001 said!!! go stand behind a floor fan(The ones that blow air around a room) and then stand in front of it, in which positition do you feel cooler, in front or in back? heheheh :) :p SysOpt.com
Copyright Internet.com Inc. All Rights Reserved. |