wjr40
07-10-2002, 08:20 PM
I have an amd-k6, and I bought an intel pocket pc camera, I am not abel to get it to work . The intel trouble shooter, claimes it will not work with an amd , is there away around this ?:t
Click to See Complete Forum and Search --> : pc camera
BipolarBill
07-10-2002, 09:16 PM
Welcome to SysOpt!
Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.
Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.
jrb420
07-11-2002, 03:33 AM
I had a problem like that when I got a free camera a long time ago. Mine was USB and I was told that only the Intel CHIPSET provided enough power to run the camera at the time. I had to send mine back and get the parallel version :( It was free though so I can't complain.
wjr40
07-11-2002, 05:02 PM
Originally posted by BipolarBill
Welcome to SysOpt!
Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 DSI D-F-V V.90 DI3635
5 DSI Modem Device Manager
5 ACPI IRQ Holder for PCI IRQ Steering
6 Standard Floppy Disk Controller
7 ECP Printer Port (LPT1)
8 System CMOS/real time clock
9 SCI IRQ used by ACPI bus
10 Philips Rhythmic Edge Audio
10 ACPI IRQ Holder for PCI IRQ Steering
11 VIA Tech 3038 PCI to USB Universal Host Controller
11 ACPI IRQ Holder for PCI IRQ Steering
12 PS/2 Compatible Mouse Port
13 Numeric data processor
14 Primary IDE controller (dual fifo)
14 VIA Bus Master PCI IDE Controller
15 Secondary IDE controller (dual fifo)
15 VIA Bus Master PCI IDE Controller
any help would be apperciated, thanks
Welcome to SysOpt!
Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 DSI D-F-V V.90 DI3635
5 DSI Modem Device Manager
5 ACPI IRQ Holder for PCI IRQ Steering
6 Standard Floppy Disk Controller
7 ECP Printer Port (LPT1)
8 System CMOS/real time clock
9 SCI IRQ used by ACPI bus
10 Philips Rhythmic Edge Audio
10 ACPI IRQ Holder for PCI IRQ Steering
11 VIA Tech 3038 PCI to USB Universal Host Controller
11 ACPI IRQ Holder for PCI IRQ Steering
12 PS/2 Compatible Mouse Port
13 Numeric data processor
14 Primary IDE controller (dual fifo)
14 VIA Bus Master PCI IDE Controller
15 Secondary IDE controller (dual fifo)
15 VIA Bus Master PCI IDE Controller
any help would be apperciated, thanks
BipolarBill
07-11-2002, 05:21 PM
AMD is not the problem - VIA is. Try loading the VIA 4in1 drivers and USB Filter Patch:
http://www.viaarena.com/?PageID=2
If no go, try booting to Safe Mode and go to Device Manager. There, remove all root hubs and then all host controllers in the USB section. Restart normally and try again.
I have other ideas. Let me know.
http://www.viaarena.com/?PageID=2
If no go, try booting to Safe Mode and go to Device Manager. There, remove all root hubs and then all host controllers in the USB section. Restart normally and try again.
I have other ideas. Let me know.
wjr40
07-18-2002, 01:10 AM
Originally posted by BipolarBill
AMD is not the problem - VIA is. Try loading the VIA 4in1 drivers and USB Filter Patch:
http://www.viaarena.com/?PageID=2
If no go, try booting to Safe Mode and go to Device Manager. There, remove all root hubs and then all host controllers in the USB section. Restart normally and try again.
I have other ideas. Let me know.
traded camera for cd burner, then bought camera that was amd compatable. I thank You for your help. However I went an alternate route.
AMD is not the problem - VIA is. Try loading the VIA 4in1 drivers and USB Filter Patch:
http://www.viaarena.com/?PageID=2
If no go, try booting to Safe Mode and go to Device Manager. There, remove all root hubs and then all host controllers in the USB section. Restart normally and try again.
I have other ideas. Let me know.
traded camera for cd burner, then bought camera that was amd compatable. I thank You for your help. However I went an alternate route.
SysOpt.com
Copyright Internet.com Inc. All Rights Reserved.
Copyright Internet.com Inc. All Rights Reserved.