LOTL
04-07-2002, 10:09 AM
Was having problems with this system locking up, and after rebooting, it hung at the Win98SE splash screen.
Tried booting in safe mode, and same thing. Tried booting from Win98SE startup disk, and was sucessful the first few times, and tried installing and running F-prot virus scan. System locked up again shortly after virus scan started.
Tried unplugging all cards except video, removed memory chips individually, reseated CPU, installed new fan/heatsink, did notice old heatsink was pretty hot to the touch when problem first occured.
Removed both hard drives, and plugged in a known working drive, and system still hangs, sometimes at Win98 splash screen, sometimes during POST.
System Specs: Dell Dimension XPS P200s. Intel Pentium 200, 64 MB RAM.
http://docs.us.dell.com/docs/dta/_trmntor/00000005.htm
Unfortunately i dont have another socket 7 CPU to try in this system, and i suspect that it may be the culprit. I havnet swapped out the power supply yet, and may try that next. I have reset the BIOS via jumpers on the motherboard, and still have the same problems.
Any suggestions welcomed.
Tried booting in safe mode, and same thing. Tried booting from Win98SE startup disk, and was sucessful the first few times, and tried installing and running F-prot virus scan. System locked up again shortly after virus scan started.
Tried unplugging all cards except video, removed memory chips individually, reseated CPU, installed new fan/heatsink, did notice old heatsink was pretty hot to the touch when problem first occured.
Removed both hard drives, and plugged in a known working drive, and system still hangs, sometimes at Win98 splash screen, sometimes during POST.
System Specs: Dell Dimension XPS P200s. Intel Pentium 200, 64 MB RAM.
http://docs.us.dell.com/docs/dta/_trmntor/00000005.htm
Unfortunately i dont have another socket 7 CPU to try in this system, and i suspect that it may be the culprit. I havnet swapped out the power supply yet, and may try that next. I have reset the BIOS via jumpers on the motherboard, and still have the same problems.
Any suggestions welcomed.