HELP!!!!!!!!!

[Hellfire901]

ok i was taking out my MB(like i have done a million times) finish what i was doing then put i back in hooked up all the wires back the way they were before put the case back together then put all the cable back then tryed to turn on the computer nothen happen so i open it back up. I looked at all the power cable to make sure they were fine witch they were looked at the cables for the power switch and reset switch they were fine, then i moves the power LED over one because i put it in the wrong spot closed the case and put all the cables back in when i went to turn on the computer i saw the power light was on but the computer would not turn on.

Can anyone give some some advice about what do to?

Specs
Abit BH6 MB
Intel celeron 300 mhz @ 374 mhz
196 MB SDRAM(64&128)
Geforce 2 MX-400 with T.V. out
Some sound card (i think Sound Blaster 32 pci)
D-link network card
48X CD-Rom(dont know who made it)
4X/4X/32 LG Ced-8083b cd-rw

I think that is about it if i forgot some thing please tell me

[dmoltrup]

Check your power, reset, and LED connectors and make sure they didn't get turned around (upside-down). Also, make sure your disconnect the power or turn the main switch off, then back on if your PSU has a main switch.

[Hellfire901]

nope that didn't do any thing to help me turn on the PC but when i fliped the power LED the light turned off

[rextex]

Check all again.I don't know,but "...What I was doing" could be it.

[Hellfire901]

stupid abit they labled the pin in the manual and the names on the MB wong so now i can load up my computer but stupid windows doesn't work now i get A fatel expection 0E has occurred at 00028:c0004e80 in VXD VMM(01) + 00003ED80. THE CURRENT APPLICATION WILL BE TERMINATED