- High Point X store Pro/BM6
- post link to temp sensor
- k6-266 to450 with 2.4V core with motherboard LuckyTech??
- whats a good cheap heat sink/fan for a P2?
- Cooling with Dry ICE..
- OC'ing Voodoo3 2000
- Alpa Fans heatsinks noisy?
- end of intel overclocking
- Amd K6-2-450 @ 600Mhz :)
- Problem with be6 rev 2 and bootup
- Abit BX6-Celeron OC
- Reducing micron sizes
- Atomic processing?
- ? for Peter Missel if you would please ?
- To CMonster : Wintune results
- Is my MoBo not OC-able?
- To much heat???
- O/C older ATI card
- Is Intel Bluffing?
- cely 300a
- Celeron VS AMD K6-2
- P2350@518
- softfsb help
- Can my Epox Motherboard run a AMD Athlon 500?
- Can a modem be overclocked? How????
- is ne cpu non clocked locked ???
- Thermal Paste Does work!
- Need help on next purchase!!
- need some help overclocking
- Silly rookie questions/ Q2 fps
- clockable or not?
- can I get my celery higher with water and peltier?
- VCC Voltage Setting?
- Pent.200MMX overclocked @ 250MHz, can I go any faster!!!!
- 550 Slot1 OEM w/o Heat Sink
- Should I get it?
- msi 6167 mobo o/c
- CuMine Shimming
- spontanious rebooting
- Pentium/Motherboard recommendations please?
- Can I o/c from the BIOS??
- The Pentium III 600Mhz Family
- Water cooler pics
- 1GHZ Athlon to be released monday
- AMD slower than Intel???
- What is a Coppermine?
- NEED HELP WITH SOFTFSB
- New Epox 133 AthlonBoard (EP7-KXA)
- What is a safe Temp????
- Which CPU should I get???
- What is PPGA and SSSS in Celeron CPUs?
- Temperature Programs,.?>!?!?
- Is the Multiplier locked on a P II 233?
- P II Help, Is it ruined???
- Am I maxed out?
- 366@600 Air Cooled
- Pent.200MMX overclocked to 266! CPU voltage is 3.2V, is that too high?!?
- What Are Acceptable Voltages??
- "Processor-free"
- stupic ram questions
- overclocking
- What's faster: K6-2 533 (95 FSB) or K6-2 500 (100 FSB)?
- Need a CPU Id program for a Dual PII/PII mobo
- OC'ing ATHLON 600 w/ FIC SD-11
- celery 400a
- dual processor setup
- options ?
- Overclocked K6-2-400
- Athlon 550 cooling solution.
- Mounting copper water jacket on K7
- Mounting copper water jacket on K7
- I'M IMPRESSED
- AMD DRX Bug
- Which is best to OC? The cel 366, 466 or cel 500?
- k6 3 450@523 stable so far
- Overclock or more RAM???
- ATHLON MOTHERBOARD CAN IT RUN 133mhz RAM
- K6-3 vs. K6-2; What's the difference?
- AMD @ 1G!
- Overclocking Athlon
- Paste already on Retail chip?
- Overclocking a K6-2/400 troubles
- HELP!!! My amd k6-2 450@500
- Water cooling.
- What HS/Fan combos do you use for your Cel 300a??
- Dual CPU's in Win 2K
- Water Block desings
- Overclocking Notebook PC AMDk6-233
- P166@210 and 83MHZ
- Any Other lgoop to put on cpu besides thermal grease
- Hardrives Drive Me Crazy
- what is..
- HEY CMonster
- Water Jacket/Block Layout
- Good overclock setup
- jumper lead settings
- Celeron 333A & Abit BH6. Now what?
- AMDK6-2 400(oc'd to 450) @ 53C
- Gonna begin my OC journey...what do ya think?
- overclocking can kin power suppply ?!!
- My list of parts to buy for my OC'ing fun
- A few ?'s about cpu's for a new system.
- Slot or Slocket for Coppermine P3's??
- Updated my site again: PanaFlow/TEC-Tutorial
- To M1pilot and others..k6-3 o/c
- skywalker[TSG] - how to get 1061MHz???
- Simple Q..unlike CPU Dual config
- What's with Sandra?
- SMP performance
- Cooling recommendations?
- More than 2 CPU Celeron SMP???
- Need help w/ K6-2 450AFX
- Anyone overclocked a P3-600e? How fast?
- Just tried CPU Boost got 366@615 then froze@621 :(
- Attention EPoX motherboard owners.
- celeron 333 problems
- does......
- Anyone up to it?
- What do ya think of these temps 500e@700 and 750?
- Normal Speed Range for CPU?
- Building a perfect celeron overclocking system
- k6-2 question
- Better Choice for OC - Athlon or P-III
- Coin effect?
- Overclocking ASUS P3C2000
- Should work, but?
- Need advice from the Masters
- Does anybody remember the site with BH6/Coppermine at 133 bus?
- The need of SETK6 (CMonster)
- please help with mobo installing
- Anyone tried Overclocking in Alaska during Winter?
- peltier wanted
- pentium 2 overclocking help
- celeron 500/533
- Shopping for Athlon
- does anybody have any exp /w c500 or c533??
- SOYO SY-6VBA 133 , any OC experiences?
- Bus speed
- Lapping A Cpu and Removing Gunk From Cpu??????
- Need some advice
- How far you get your celery?
- Have you seen that????
- dissaseble p3
- Removing the case from a Pentium II
- anyone using beta ver 1005 for the P3BF????
- AMD K6 III on an FIC VA503+ PCB Rev 1.1A?
- Slocket choice help
- Win2K works but Win98 doesn't
- Can someone explain PCI/AGP Bus/Voltage/Harddrive Corruption??
- OCing a Celeron 300a
- Slocket converter for my celery
- Diff. between 550E "slot 1" and 550E "fc-pga"??
- Check out the new HARDOCP forum...hardcore overclocking baby..........
- RAM for P3 Coppermine
- Where do I find a good 366C to Overclock?
- Overclocking a P3-600E
- Is there a problem with Pentiums Pro and softw.
- soyo 6vba 133 w/ cel 433
- Duct Tape helps bring down the noise
- SECC1 vs SECC2 What's the difference?
- maxtor ultra66 7200rpm good for Overclock
- Can the M-Tech M549 MoBo accept K6-3 400
- Newbie...want to OC K7M with 600mhz....
- k601
- Is that silver on the back of my old P2 sink??
- how to tell when a cel 366 was made.
- how far can you OC a k6-3-400
- help with Athlon 550
- darn this BP6
- Anyone in here has an Intel SE440BX mobo?
- Overclocking VIA chipset and Intel
- Help about 112 on Bus
- Target. Where are you?
- hard drives and overclocking
- Need more BIOS tweaks!
- Either K6-2/500 or K6-3/400 ?
- confused over different flavors of PIII
- FIC.VA-503+
- CPU use vs FAN speed
- sandra 2000 way off or way on
- O'c an Amd k62 450?
- Overclocking a Cyrix MII on a Gigabyte 5AA
- When are the new Celerons coming?
- Strange wintune results
- Feel sorry for Kryotech
- well I,m going out of town
- need some insight to problem
- How do I benchmark a video card?
- Coppermines Need to know about them Fast please help
- EPOX 7KXA: Raising CPU I/O voltage
- Overclocking a K6-2
- My 300a died what to do know?
- Is thermal paste an electrial conductor???
- What is Mini Speed ?
- Explain peltier please
- 100mhz bus speed
- What is the best motherboard to use for Coppermine Overclocking? !!! HELP !!!
- 88 mhz to high for AGP?
- How to hold on a Heatsink onto a Video card?????
- CPU temperature
- Benchmarking cheating
- I know hamsters are out.........but
- Temp. n' o/c questions
- celeron 400a slot1 voltage 2.06?
- ASUS P5A OVERCLOCKING......HOW ??
- Motherboard choice for 600e FC
- VIA / Cyrix Future???
- Wanta build your own water cooling unit??
- 400 cel @570
- rain 20 is this for real?
- Bizarre-- 300a finally overclocks at 504
- Keep my celery 366 overclocked or a AMD K62-450 ??
- Fan, cooling, and other coool Info!???
- Easier 2 OC a K6-2 450 or 500
- Best Overclocking Video Card
- Just purchased MSI 6309 Any reviews on it?
- Temp monitoring fan...
- Abit BH6 and PCI divider clock..is there 1?
- Playing games kick me back to windows
- TNT2, Viper II or TNT2 Ultra
- Fit a slot 1 cooler on a ppga socket 370?
- The K6-2+ are out, should I one @ 500MHz, or get a Mobo and a Celeron 500
- Award Bios Update
- Best setting for overclocking
- thanks for help
- Best Conditions for Running Sandra
- Trading Clock speed for bus speed
- BH6 1.0 with P3 600 512k 100fsb will it work?
- 433 how fast
- Abit BH6 owners...PCI divider clock?
- Upgrading advice
- how to cool a creative tnt2 ultra
- problem with my amd-k62 350
- unsure???
- how do you overclock a tnt vid card?
- voltage/multiplier?
- O/C C-366->550 on Asus P2B - Need advice
- What additional cooling do I need?
- Can a Dell L500c's Celeron processor be overclocked?
- sandra
- thanks for the help
- Best heatsink for bp6
- Check out this athlon temp
- syncronous/asncronous
- WOOHOO! HIHAAARRR!! Going for the max!!
- jumping ship
- HEAT?!?!
- Compaq Deskpro 4000 P2 233
- Intel or AMD?
- CMonster: Need water-cooling info. (or anyone else)